This item is in stock. Welcome your order at any time.
Price information:
Retail Price : US$676/Unit
Shipping Cost : US$164 /Unit (Shipping to worldwide,all countries)
Total Cost : US$840/Unit

Shopping Tips
Shipping cost: Our total price include shipping cost .
Shipping way and time:Your Parcel will be shipped out from China through Hongkong Small Parcel  which will take 20 to 35 days normally. We ONLY offer tracking No. for partial orders ( Total amount is above US$30 usually ) . If your order can not reach US$30 and you want to get a tracking No. ,please contact us to pay the price difference for Hongkong registered parcel.
We also offer Express Delivery service. You can select the DHL or EMS. Typically takes only 7 to 15 working days. If you want to use the express service you need to pay for the price difference. Please contact us (sale01.ys@live.cn) for the exact shipping cost before you pay.
Shipping address: Regardless of which address you leave on our online shop system,we will ship the item to your Paypal address ONLY, if you pay through Paypal.
Wholesale price:If you need to wholesale, please send email to sale02@lunashops.com for wholesale price.

Item Description:

Item Condition: Brand New with retail package.

This item will be shipped out by express shipping. Thanks

The machine is a manual type single punch tablet press machine. It can punches round tablets less than 12mm. The weight of the press machine is only 24 kg, this single press machine applicable to the pharmacy, laboratory, home, school, or other places to apply.Motor is not needed, so it is suitable for any remote areas, it is good for energy saving, reducing carbon emissions.A lot of the branded vitamin tablets on the high street have unnecessary additives and supplements that you just don’t need. This press allows you to mix the vitamins and supplements that you require for your exact diet and convert them into convenient pills.

Maybe you are considering setting up a small business selling vitamin, weight loss, or herbal tablets. If so this is the right press for you. It is able to produce up to 2400~3600 tablets per hour, using a maximum presser of 1.5  KN (depending on model). It will run for hours continuously producing identical tablets time after time, giving your business a professional look.

It has small volume light weight, easy to carry, But will make all kinds of powder and granular material into suppression.

 

 
Technical Parameters

                       Max.Pressure
    1.5Kn
Max. Dia of Tablet     12mm
Max. Thickness     6mm
Max. Depth of Filling     16mm
Production Capacity     40-60pcs/min
Weight     24KG
Overall Size     300mm*190mm*480mm

 

 
Feature

1.The main body of this machine is the gantry-type made by carbon steel. The main spindle junction with the partial core gear and the cam. The rocker arm and the hand shank are on the right of the spindle. When turn the main spindle by manual, then it can cause the partial core gear, cam, lifting poker, feeder to turn, do different lifting movement.

 

2.The process of this machine is: A. feeding material; B. punching the tablets; C. ejecting tablets. These are the three procedures are working continually. Each program can be adjusted, suitable for all kinds of tablets to forming.

3.R & D will find this press useful as it can hold from as little as 2 grams of raw powder and you can produce one tablet at a time using the hand crank function.
 

4.The fine features of this machine are small volume light weight, attractive appearance, compact structure, simple operation, extensive use, easy to carry and so on.But it is also can make all kinds of tablet by using different types of die.

 

5.The TDP-0 can provide many different uses, Including:

1) Small or Large scale production, as this press can be hand-operated as well as mechanically, you can produce single tablets for a sample before you start producing larger batches. Only one pair of punching dies can be erected on this press at a time.

2) Both filling depth of material and thickness of tablet are adjustable.

3) Turning different kinds of granular raw materials into a variety of different tablets.

 
How to use

Please download the MANUAL HERE to see how to use this machine.Please first connect all accessories to the machine.

Set up the dies:At first demount the hopper, feeder, middle die plate, after that wash the middle die plate, die, hole of die, keep them dry and clean. Then according to the following steps:

Step 1: To set the lower punch, insert the lower punch pin into hole of lower punch core.Pay attention to the gap of punch rod that insert to bottom must aim at the set screw then tighten the lock screw.

Step 2: To set the upper punch, insert the upper punch pin into the hole of upper core, also make sure to insert to the upper end of the punch core, and tight the nut with wrench.

Step 3: Put the middle die into the die hole. This is an important step to make sure the upper, lower and middle die are line-up. Pay attention to the end face of middle die should flush with the surface of the plate, after adjusting, tighten the lock screw.

Step 4: Keep the upper, lower and middle die in line-up position, then mount the tablet middle plate at the machine body, tightens the screws, and turns the hand handle by hands, makes the upper punch pin down slowly, inserts into middle die hole. At this time, adjusting the middle die plate, so that after the upper die pin insert the middle die hole should be nimble without knock, and smoothly. Then tightens the screw at the middle die plate and turns again the flywheel for ten revolutions or more. Now, if the punch and die are mounted properly without strong friction, then input materials testing.

Step 5: Adjusting the out put rating nut to regulate the height of the tablet. Make sure it will line-up with the middle die plate when it at the zenith.

Step 6: Adjusting the filling rating nut to regulate the thickness of the tablet. Do counter-clockwise direction it will increase the filling volume, so it will add the thickness of the tablet. And vice versa.

Step 7: Make sure of that the put out height and the thickness of the tablet, then tight the rating nut plate.

Step 8: Adjusting the hardness of the tablet: At first loose the upper die hole lock nut the upper die hole. Then do the counter-clockwise direction to decrease the press, and vice versa. Please don't adjust wide range at once, just as the necessary, then tight the upper die hole lock nut.


Friendly Tips

    Never put the hands between the dies to avoid the accident of injure hands.
    Make sure that the material be made to granule before punching the tablets.
    The quipment must be fixed to the work table when it on operation.

 
Maintenance

    Lubricating oil should be coated in lubricating points and surface every time before operating the press.
    when finished a batch of production, should take out the remainder powder or grain, and sweeps and cleans the residual powder within any parts in the machine and apply pharmaceutical grade grease.
    If the press is not in use for more than one week, then should remove the punch and die, and wipe the machine clean up, and apply pharmaceutical grade grease or white lithium grease on the smooth surface of components, then put it in the Container with a cover.

What is in the package:

TDP-0 MANUAL TYPE PILL MAKING DEVICE UPDATED TABLET TABLETS PRESS MACHINE×1